Ribbon blenders is also known as kneader mixer, it is heavy-duty mixer specially designed to produce uniform mixing and kneading of highly viscous materials.
The Ribbon Blenders consist of a U-shaped horizontal trough and a specially fabricated ribbon agitator. It features with an innovative tilting system for mixing a variety of crackers, cookies.
The signal mixer or double arm kneader mixers is equipped with two mixing blades placed in a W-shaped horizontal trough, which consists of two shafts of 'Z' shapes blades. They rotate in opposite direction at the same or different speeds.
The kneader mixer have the capacity of shearing, stretching, folding, dividing and it is used for recombining of material processed, so that the kneader can reach the desired results.
The sigmal mixer machine have been the workhorses for blending applications and are very common in the chemical, pharmaceutical, and food industries, it is also suitable for Food, Adhesive, Gum, Pigment, Paste, pasty, sticky, gritty slurries, Dyes & Pigments, Paint, Polymers Plastic, Putties, Plastic, Pharmaceuticals, Printing ink, stiff pastes, adhesives, polyester Compounds, flush colours, PVC coatings, Rubber compounds, Confectionery etc.
The ribbon blender or kneader mixer doesn't perform heating, cooling, coating, but also are applicated for other area, such as Blending large volumes of dry solids, dry powder to wet phase mixing, mixing of bulk drugs, chemicals and cosmetic powders etc.
Main Benefits Of Ribbon Blenders
Ribbon mixers are the market's most versatile and widely used type of powder blending machine. They are most commonly used for solids-on-solids mixing. Still, they can also be used for coating a dry particle with a liquid ingredient or particle absorption of a liquid addition. Slurry and liquid particle suspension mixes are permitted in rarer applications with careful design and attention to detail.
Because of the ribbon blender's convective mixing pattern, short and fast mixing cycles are often possible, ranging from a few minutes to 20 minutes (depending on the volume and complexity of the formula). Given the fast-mixing processes of these bulk solid’s blenders, you'd think the ribbons would spin at a very high RPM, but this is not the case. Ribbon agitators are typically limited to a tip speed of 300 feet per minute; the particles to be mixed fold gently because of the low rate. As a result, this allows for use on fragile and brittle materials while maintaining particle integrity.
Ribbon mixers can also discharge completely through a centrally located discharge port. The product can be easily pushed back and forth in the mixing vessel by running the mixer at low speed. Various powder valves can be used on the mixer's discharge port, but plug valves are the most common. When in the closed position, plug valves are flush with the internal surface of the mixer body, preventing material buildup during the mixing cycle. Ribbon mixer working volume capacities are frequently as low as 30%; any less would not allow sufficient contact between the ribbons and the materials to be mixed. In some applications, the mixer can operate at nearly 100% capacity, but the optimal mixing capacity is usually around 50-70% volume.
Ribbon blenders have a wide range of applications due to their versatility and gentle mixing action, including spices, drink mixes, nutraceuticals, instant recipes, cosmetics, polymers, plastic compounds, fertilizers, and ceramics, to name a few. They can be used in any dry material industry, including food and beverage, pharmaceutical, chemical, minerals, and energy.